Solder a wire from the VBUS pin of the new charging port to the VBUS test point on the PCB. Solder Ground:
The phone draws less than 500mA. Fast chargers (9V/12V) will not engage because the phone does not support USB BC 1.2 or Qualcomm Quick Charge negotiation.
Check your local electronics store for a replacement micro-USB port (common 5-pin SMD type) or use the pinout above to verify any cable before plugging it into your phone.
In rare cases where your RM-908 supports data, connect fully:
Nokia 105 Rm 908 Usb Pinout -
Solder a wire from the VBUS pin of the new charging port to the VBUS test point on the PCB. Solder Ground:
The phone draws less than 500mA. Fast chargers (9V/12V) will not engage because the phone does not support USB BC 1.2 or Qualcomm Quick Charge negotiation. Nokia 105 Rm 908 Usb Pinout
Check your local electronics store for a replacement micro-USB port (common 5-pin SMD type) or use the pinout above to verify any cable before plugging it into your phone. Solder a wire from the VBUS pin of
