Kl Sn102 94v-0 Datasheet Fixed File

| Dimension | Min (mm) | Max (mm) | | :--- | :--- | :--- | | A (Body Height) | 2.20 | 2.40 | | b (Terminal Width) | 0.50 | 0.70 | | c (Terminal Thickness) | 0.45 | 0.58 | | D (Body Length) | 6.50 | 6.70 | | E (Body Width) | 5.90 | 6.10 | | e (Pitch) | 2.28 BSC | - | | L (Foot Length) | 1.00 | 1.30 |

| Rating | Burn Time After 2 Flame Applications | Drips Ignite Cotton? | Burn Through Sample? | Common Use | | :--- | :--- | :--- | :--- | :--- | | | ≤ 10 seconds each | No | No | High-safety (power supplies, automotive) | | 94V-1 | ≤ 30 seconds each | No | No | General electronics | | 94V-2 | ≤ 30 seconds each | Yes (drips allowed) | No | Low-cost consumer goods | | HB | Slow horizontal burn | N/A | N/A | Non-critical components | Kl Sn102 94v-0 Datasheet

The UL 94V-0 rating is a standard for assessing the flammability of materials used in various applications. This rating indicates that the material has passed a series of tests for flammability, including: | Dimension | Min (mm) | Max (mm)

The device or PCB material will not propagate a flame. In a short-circuit or overheating event, it may char or smoke, but it will not sustain fire. This is mandatory for components mounted on high-voltage power supplies or near connectors. This rating indicates that the material has passed

The substrate and laminate materials used in this board are engineered for high thermal stability and structural integrity. : High-Tg FR-4 glass-reinforced epoxy. Flammability Rating : UL 94V-0 compliant. Dielectric Constant : 4.2 to 4.5 at 1 MHz. Glass Transition Temperature : 170°C to 180°C. Thermal Conductivity : 0.35 to 0.40 W/m·K.

The KL SN102 offers good value for cost-sensitive designs where a slightly higher RDS(on) is acceptable. Its 94V-0 rating is on par with Tier-1 manufacturers, making it suitable for power supplies, battery management systems, and LED drivers.