After the software opens, go to Config -> Parameter (Password: 123456 or 1 or ezcad2 ). You must re-enter your laser wavelength (1064nm, 355nm) and correct the "Lens" parameters (usually 160mm or 110mm). If you don't know these, look at the sticker on your laser's scanning head.
file is corrupted, the easiest fix is to replace it with a backup. Most machine manufacturers include a "Golden Backup" or original software folder on a USB drive. Copy the ezcad.cfg failed
: Ensure the EZCAD folder is not marked as "Read Only." If EZCAD cannot write to its configuration file, it may trigger a failure message. You can also try running the software as an Administrator by right-clicking the EzCad2.exe EzCad3.exe Verify USB and Drivers After the software opens, go to Config ->
Try these in order. Stop when the error disappears. file is corrupted, the easiest fix is to