Fanatec Clubsport Pedals V1 Manual _hot_

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | PS/2 cable not fully seated | Push until you hear a click. Use a pen to press the recessed end. | | Brake at 100% constantly | Broken load cell or loose wire inside base | Open base (4 screws). Check red/black wires on the amp board. | | Throttle spikes to 100% randomly | EMI interference from wheel motor | Move the pedal USB cable away from power cables. Add a ferrite core. | | Windows detects but no input in game | Wrong pedal combination type | In the Fanatec driver, combine pedals as "Single Axis" or "Separate." | | Clutch pedal feels notchy | Dry bearing in the pivot | Use a drop of PTFE spray (not WD-40) on the bronze bushing. |

: Uses a 50kg pressure-sensitive load cell rather than travel distance, simulating a real car's hydraulic brake and significantly improving muscle memory and consistency. Magnetic Sensors fanatec clubsport pedals v1 manual

: Users can adjust pedal face placement to suit different driving styles (e.g., heel-and-toe) and change the brake pedal's throw by moving the brake arm to different mounting holes. Brake Vibration | Problem | Likely Cause | Solution |