Dixell Xw60ls Manual !!install!! Here

Push and immediately release the key; the display will show the current set point. The "SET" LED will start blinking.

| Code | Meaning | Fix | | :--- | :--- | :--- | | | Room probe failure (open/short) | Check wiring at terminals 11-12; replace probe. | | P2 | Evaporator probe failure | Check wiring at 13-14. Unit will use timed defrost. | | HA | High temperature alarm | Check if door is open, refrigerant is low, or condenser is dirty. | | LA | Low temperature alarm | Evaporator fan may be stuck on. | | EdF | External digital input (door) is open | Close the door or bypass the switch. | | rtC | Real-time clock error (if optional board installed) | Replace battery. | dixell xw60ls manual

For specific OEM variations (e.g., XW60LS with different probe curves or custom passwords), consult the original equipment manufacturer’s supplement. Push and immediately release the key; the display

If your display is flashing an alarm, refer to these common codes to identify the issue: XW60L - Copeland | | P2 | Evaporator probe failure | Check wiring at 13-14

: To achieve the IP65 rating, always use the front panel rubber gasket (model RG-L). 3. User Interface and Basic Operation

Front panel is 185 x 38 mm; drilling template is 150 x 31 mm.