Mitsubishi Meldas - 64 Parameter Manual

Changing servo parameters incorrectly can cause violent oscillation, overcurrent alarms, or mechanical damage.

If the backup battery on the main

The manual includes a column titled "Setting Range." Never enter a value outside this range, even if the control allows it. You can lock up the system. Mitsubishi Meldas 64 Parameter Manual

: Combines parameter definitions with alarm troubleshooting codes Connection & Maintenance Manual | | Stroke Limit + Side | #2013

Fundamental settings that define the machine's physical limits, such as axis travel limits and coordinate system offsets. only for temporary fix. |

The manual is organized into logical modules that govern different aspects of the NC (Numerical Control) unit:

| Function | Parameter # | Typical Value | Notes | | :--- | :--- | :--- | :--- | | | #2001 (X), #2002 (Y), #2003 (Z) | 10000 - 30000 mm/min | Check machine builder’s max. | | Backlash Compensation | #2005 (X), #2006 (Y), #2007 (Z) | 0 - 999 (microns) | Set to actual measured lash. | | Stroke Limit + Side | #2013 (X+), #2014 (X-) | +/- 99999999 microns | Prevents overtravel. | | Rigid Tapping ON | #1150 bit 3 | 1 (Enable) | Requires spindle encoder. | | Soft Limit Override | #6001 bit 5 | 0 (Disable for setup) 1 (Enable) | Use only temporarily. | | Battery Alarm Ignore | #1078 (bit 0) | 1 = Ignore | Dangerous; only for temporary fix. |