Acer Q87h3-am Motherboard Manual [work] Jun 2026

When installing the board into a new case, use the following layout for wiring:

This is where you connect your case buttons and LEDs. Usually located on the bottom right of the board. Power Switch: Top row, pins 3 and 4. Reset Switch: Bottom row, pins 3 and 4. HDD LED: Bottom row, pins 1 and 2. Power LED: Top row, pins 1 and 2. 2. Power Connections Main Power: 24-pin ATX connector. Acer Q87h3-am Motherboard Manual

In this comprehensive guide, we serve as a living manual. We will cover everything from BIOS settings and jumper locations to front panel pinouts and CPU compatibility. By the end of this article, you will have all the technical documentation you need to master the Acer Q87h3-am. When installing the board into a new case,

| Pin | Signal | Description | Pin | Signal | Description | | :--- | :--- | :--- | :--- | :--- | :--- | | 1 | HDD_LED+ | Hard Disk LED Positive | 2 | PWR_LED+ | Power LED Positive | | 3 | HDD_LED- | Hard Disk LED Negative | 4 | PWR_LED- | Power LED Negative | | 5 | GND | Ground | 6 | PWR_SW | Power Switch Signal | | 7 | RESET_SW | Reset Switch | 8 | GND | Ground | | 9 | NC | No Connection | - | - | - | Reset Switch: Bottom row, pins 3 and 4

Do use standard Windows BIOS update tools from Acer’s generic driver page. You must input your exact SNID (Serial Number ID) on Acer’s support site. Using the wrong BIOS revision for your specific Veriton model can brick this motherboard permanently (no dual BIOS backup here).