: Once the lights cycle, release the button and wait approximately 2 minutes for the system to fully reboot into its factory state. Method 2: Console Port Reset (No Password Required)
You will enter the . Type the following command exactly: Hard Reset LINKSYS SRW224G4
This process wipes all configurations (VLANs, port settings, etc.). The default settings are: (blank/none) IP Address: 192.168.1.254 Method 1: The Physical Button Method (Easiest) Ensure the switch is plugged into power. Locate Button: Find the small "Reset" button on the front or back panel. Press and Hold: : Once the lights cycle, release the button
– Once the System LED returns to a steady green (or slow blink), attempt to log in via HTTP at the default IP. The default settings are: (blank/none) IP Address: 192
Performing a hard reset on the LINKSYS SRW224G4 switch is a straightforward process: