Kb926qf Datasheet !!install!!

Many pins are multiplexed with GPIO. Configuration is done via index/data register pairs (usually at 0x2E/0x2F for logical device selection). GPIOs can be used for:

| Parameter | Min | Typical | Max | Unit | |--------------------|------|---------|------|-------| | VCC (main) | 3.135| 3.3 | 3.465| V | | VSB (standby) | 3.135| 3.3 | 3.465| V | | Ambient temperature | 0 | 25 | 70 | °C | | Input low voltage (VIL) | 0 | – | 0.8 | V | | Input high voltage (VIH) | 2.0 | – | 3.465| V | kb926qf datasheet

until the power button is pressed, at which point it helps resume power plan logic. After reading BIOS data successfully, this signal should go High (3.3V) to enable the "always-on" 3.3V and 5V standby power rails. LID_SW# (Lid Switch): Many pins are multiplexed with GPIO