G4010 Service Mode [cracked] -

This information is provided for educational purposes. The user assumes all responsibility for any changes made in Service Mode.

While still holding the Power button, press the Stop (triangle icon) button 6 times . Release: Release both buttons at the same time. g4010 service mode

| Symptom | Error Code | Solution via Service Mode | | :--- | :--- | :--- | | Printer shows "Waste ink absorber full" | 5B00, 5B01 | Reset waste ink counter | | Region mismatch (e.g., using non-local ink) | 1680 | Change destination settings (not recommended) | | LCD freezes or boot loops | N/A | Perform EEPROM initialization | | Replacing main logic board | N/A | Write serial number & ink usage data to new board | This information is provided for educational purposes

Entering requires precise timing. The printer must be powered off, but connected to AC power. You will not need a USB cable for the entry sequence, but you will need a computer with the Canon Service Tool (version 4900 or higher is recommended for G4010). Release: Release both buttons at the same time

Service Mode is intended for qualified technicians. Changing incorrect settings (e.g., ink absorption counter reset without fixing a leak) can cause permanent damage, void your warranty, or render the printer unusable. Proceed at your own risk.