Peugeot 607 Front Bumper Removal ((top)) Jun 2026

on ramps or axle stands. You need access underneath. Turn the wheels full lock left, then right, during the process.

Locate the main black multi-pin connector on the passenger side (UK driver side / LHD passenger side) near the radiator fan. It is usually clipped to the chassis leg. Unplug it. This kills power to everything in the bumper. Then, follow the harness along the inside of the bumper and unclip the wiring loom from the plastic tabs. peugeot 607 front bumper removal

Open the hood to access the top of the bumper assembly. There are typically four to six plastic rivets or Torx screws securing the upper grille and bumper lip to the radiator slam panel. Carefully remove these and set them aside in a organized tray. 2. Wheel Well and Fender Connection on ramps or axle stands

: Unscrew the 10mm bolts on each side inside the front wheel arches. These connect the bumper to the side wings. You may need to pull back the wheel arch liners slightly to reach all fasteners. Locate the main black multi-pin connector on the