Scania Sops File Parameter List !!top!! Info

| Error Code | Meaning | Solution | |------------|---------|----------| | | Checksum mismatch | Recalculate via SDP3, do not manually edit hex. | | SOPS-204 | Parameter out of range (e.g., 5000 rpm) | Check min/max via “Parameter Info” button. | | SOPS-307 | Dependency conflict | E.g., P9-01-00 requires a hardware PTO installed. | | SOPS-410 | Security access required | Use Scania Developer Mode or dealer login. |

: Change specific parameters (e.g., disabling NOx control or increasing speed limits). : Convert the XML back into a SOPS format. : Write the modified file back to the vehicle ECUs. specific FPC/XPC ID for one of these parameters or need guidance on using a SOPS editor Scania SOPS File Editor Overview | PDF - Scribd Scania Sops File Parameter List

Defines the factory-governed maximum speed. | Error Code | Meaning | Solution |

| Parameter Name | P-Number | Value Range | Description | |----------------|-----------|--------------|-------------| | Gear Shift Mode | P2-01-01 | 0=Economy, 1=Normal, 2=Power | Changes shift points. | | Start Gear (Empty) | P2-02-05 | 1-12 | Default gear from standstill when unladen. | | Start Gear (Loaded) | P2-02-06 | 1-8 | Default gear when GCW > config threshold. | | Kick-down Sensitivity | P2-04-12 | 0-100% | Throttle % required for kick-down. | | Hill Start Aid Timer | P2-06-03 | 0-5 sec | Brake hold time on incline after pedal release. | | | SOPS-410 | Security access required |