| LED Color/Pattern | Meaning | | :--- | :--- | | Solid Blue | Idle, connected at USB 3.0 speed | | Pulsing Blue | Active read/write | | Solid White | Connected at USB 2.0 speed | | Blinking White (2x/sec) | Encryption locked – waiting for fingerprint | | Solid Red | Critical error – see troubleshooting | | Blinking Red/Blue | Firmware update in progress – DO NOT UNPLUG | | Off | No power or drive in sleep mode |
A typical Y-disk consists of the following components: y-disk instructions manual
Once you share the details, I can produce a structured report including: | LED Color/Pattern | Meaning | | :---
A: Yes, but all data will be permanently lost. Press and hold the fingerprint sensor for 20 seconds while plugging into a computer. The drive will factory reset. Up to 55°C (131°F)
Up to 55°C (131°F). Too hot? You may be copying large files over USB 2.0 (slower but hotter). Use the USB-C port for high-speed transfers. If it exceeds 70°C, contact support – the thermal pad may be defective.